UBIQUITI LiteStation 5
UBIQUITI LiteStation 5
UBNT LiteStation5 - The LS5 is an industrial rated, hi-performance 5GHz 802.11a wireless platform featuring superior RF performance, compact design, and full Linux SDK support
Click on photo to expand
Features
Introducing the first 400mW integrated subscriber station specifically designed for long range point-to-multipoint 5GHz outdoor wireless networks. The LS5 delivers superior radio performance in a compact design at an attractive cost.
Specifications
Processor Specs - Atheros AR5312 SOC, MIPS 4KC, 180MHz
Memory Information - 16MB SDRAM, 4MB Parallel Flash
Serial Interface - 10Pin (5x2) Header available for RS232/DB9
Networking Interface - 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Wireless Approvals - FCC Part 15.247, IC RS210, CE ETSI EN301 489-17 / 893
RoHS Compliance - YES
TX Channel Width Support - 5MHz / 10MHz / 20MHz / 40MHz
Max Power Consumption - 7.0 Watts
Power Method - Passive Power over Ethernet (pairs 4,5+; 7,8 return)
DC Voltage Rating - 5-24V (18V max recommended)
ESD/EMP Protection - Transient Voltage Suppression at POE port
Operating Temperature - -40C to 85C (System PCB optimized for hi-temp)
Modes - Station, StationWDS, AP Bridge
Services - SNMP,DHCP,NAT
Utilities - Antenna Alignment tool, Discovery Utility
Security - WEP/WPA
Outdoor Range (Antenna Dependent) - Over 50km
Complete Datasheet - http://www.ubnt.com/downloads/ls5_datasheet.pdf
Attachments
Datasheet -
ls5_datasheet.pdf
Manual, user guide -
ls5_manual_user_guide.pdf
Declaration of conformity -
ls5_declaration_of_conformity.pdf
AirOS configuration source -
AirOS
Ubiquiti Air OS v3.1.1 - LiteStation5 -
Air OS v3.1.1
Ubiquiti LiteStation5 Firmware V 2.2.1 -
Firmware V 2.2.1
Ubiquiti LiteStation5 Firmware V 2.1.9 -
Firmware V 2.1.9
Litestation5 recovery procedure -
LS-Recovery.txt
