UBIQUITI Routerstation Pro
UBIQUITI Routerstation Pro
Ubiquiti RouterStation Pro, 4 port Gigabit Switch, 3x miniPCI, 128 MB RAM, 680 MHz
Click on photo to expand
Features
• 802.3af 48V compatible
• Gigabit Ethernet Switch (4 ports)
• 128MB RAM
• 16MB Flash
• USB 2.0 Support
• SDIO Support
• 680MHz CPU (Option to overclock to 800)
• Robust ESD/Surge Protection for Industrial Applications
• Support for 3 Ubiquiti SR,XR,or SR71 radios
• Built in dB9 connector
• Easy Access to full GPIO signals
Specifications
Pro Version Enhancements:
• 48V 802.3af Power Over Ethernet
• 4-Port Gigabit Ethernet Switch
• 128MB RAM
• On Board SDIO Support
• On Board, USB2.0, RS232/dB9
• On Board DC power jacks
1. Overall system configuration
* CPU Atheros AR7161 MIPS 24K running @ 680MHz
* MEMORY DDR 128MB
* FLASH SPI 16MB
* 4-Port Gigabit Ethernet Switch
* Three MINI-PCI Slots supports Type IIIA
* USB 2.0 Host
* Built in RS232/dB9 Connector
* SDIO
* On board Real Time Clock "RTC"
* DC Power Jack
* 802.3af 48V compatible
2. Power Supply Range 40VDC to 56VDC
* Using Higher voltage is recommended since it will use lower current
* Typical Power Consumption is 3W idle no radios present
* 5W idle One Radio present
* 7W while passing 1000Mbps traffic
* Single RJ45 "J1" is for WAN and 802.3af compatible Power Over Ethernet
* Supports high power POE up to 25W
3. Ethernet Interface
* J1 Single WAN port 10/100/1000
* J2 Tripple LAN Port 10/100/1000
* 2 RGMII Ethernet Logical Ports to Ethernet Phy Switch -
o 1 RGMII port for WAN Port
o 1 RGMII port for LAN Ports
* Ethernet Phy switch, Atheros AR8316
4. Real Time Clock "RTC" Interface
* RTC Interface shares the SPI bus with the on board FLASH
* Active high signal on SPI CS enables RTC, active low signal on SPI CS enables FLASH
