LigoWave Infinity NFT-2AC

LigoWave Infinity NFT-2AC 802.11bgnac, AP, Repeater, 2Ghz and 5Ghz, MIMO dual 2x2, 3x Gbit LAN, 1x POE-in LAN 802.3 af/at, Power - 27dBm, Supports Infinity Software Controller, 48V POE included

Price: * For orders (total sum):
88.00$ >0$
Login for discounted prices >500$
In stock

* better prices only for registered customers


The NFT 2AC is a WI-FI access point based on 802.11ac technology with an integrated 2.4 and 5 GHz (2x2) MiMo radios with 27 dBm output power. The gigabit Ethernet port with 802.3af/at support allows powering the device with PoE switches. Two additional Gigabit Ethernet ports allow extending the network or connecting additional devices to the access point. Small form factor (15 cm only), sleek design and unique mounting bracket makes the NFT 2AC ideal for indoor installations requiring cost-effective high-performance devices.

Infinity controller: 3 ways to manage your network
Each device is configured via the user interface individually. This method is suitable for small networks not requiring centralized management and monitoring.
Integrated Controller
The master access point manages and monitors other devices on the same network. This controller-less architecture is suitable for small to medium size networks with up to 50 devices.
External Controller
A local or cloud-based controller is used to manage and monitor the devices allowing deployment of large scale networks and management using a single system.

LigoWave access points have an integrated mobile device detection feature. Any device within range can be logged with MAC address and date / time without any user interaction. The data is exported in real time and can be used to enhance the services of enterprise or managed service providers by importing it to their own application. An API is available upon request. There are several technology partners already using the functionality including Cloud4Wi and Socifi.


WLAN standard: IEEE 802.11 a/b/g/n/ac
Radio mode: MIMO dual 2x2
Operating mode: Access point, repeater
Radio frequency band:
2.402 - 2.484 GHz (country dependent) FCC 2.412 - 2.462 GHz (CH1-CH11)
5.170 - 5.875 GHz (country dependent) FCC 5.745 - 5.825 GHz (CH149-CH161)
Transmit power: 2.4 GHz: 27 dBm @ MCS0, 5 GHz: 27 dBm @ MCS0
Channel size: 20, 40, 80 MHz
Modulation schemes:
802.11 ac: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
802.11 a/g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
802.11 b: DSS (CCK, DQPSK, DBPSK)
Data rates:
802.11 ac @ 80 MHz: 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
802.11 n @ 40 MHz: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
802.11 a/g @ 20 MHz: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11 b @ 20 MHz: 11, 5.5, 2, 1 Mbps
Duplexing scheme: Time division duplex
Wireless security: WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, Hotspot (UAM)

Type: 4 x internal omni-directional antennas
Gain: 2.4 GHz: 3 dBi, 5 GHz: 3 dBi
Coverage radius: 100 meters (328 ft)

Interface: 3 x 10/100/1000 Base-T, RJ-45

Operating mode: Bridge, router IPv4 and IPv6
Management: IPv4 Static, dynamic
Management: IPv6 Static, dynamic stateless, dynamic stateful
Secondary: IPv4 Supported
VLAN: 802.1Q for management and data
Virtual: SSID 8 per each radio
Client isolation: Supported
Bandwidth limitation: Supported per SSID

Services: SNMP server, NTP client, WNMS client

Power method: DC jack (37 - 56V) or 802.3 af/at with passive PoE (37 - 56V) support
Power supply: 100 – 240 VAC to 48 VDC PoE (included)
Power consumption: (max) 14 W

System monitoring: SNMP v1, syslog

Dimensions: 153 mm (6.1‘’), 147 mm (5.8 ‘’), 29 mm (1.14 ‘’)
Weight: 188 g (6.63 oz)
Mounting: Suspended ceiling mount, wall/ceiling mount, pole mount

Operating temperature: -10°C (14 F) ~ +55°C (+131 F)
Humidity: 0 ~ 90 % (non-condensing)

Certification: FCC/IC/CE

Additional product information:

Quick Installation Guide