LigoWave LigoDLB 5

LigoWave DLB-5 5Ghz MIMO 2x2 AP/CPE outdoor unit, High 29dBm power, 2x N-TYPE Connectors, 80,000 PPS, up to 170 Mbps capacity

Price: * For orders (total sum):
79.00$ >0$
Login for discounted prices >500$
>1000$
>5000$
>10000$
Qty:
In stock

* better prices only for registered customers
 

Features:

5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz)
80,000 PPS
170 Mbps capacity
High output power 29 dBm radio
External N - connectors
Distance recomendations: Antenna dependent
Powerful OS
Smart polling data transmission protocol (iPoll 2)
Weather proof (IP-65 rated) design
Free WNMS (WNMS – Wireless Network Management System)
Responsive HTML 5 based GUI
Wall and pole mounting option

New Hardware platform
Powerful new generation CPU ensures better performance delivering higher up to 170 Mbps capacity and almost 2 X higher packet per second rate (80000). Narrow (5 and 10 MHz) channel support ensures steady performance in noisy environments. More RAM improves the performance with multiple users connected to a single base-station and larger flash stores a 2nd failover firmware image.

Integrated surge protection
3 kV line to ground and 1 kV line-to-line protection allows operating in a harsh weather conditions and unstable electrical installations.

New OS
New operating system includes all the essential features for point-to-multipoint networks. User interface is built using HTML 5 technology with responsive design. Among the new features there are IPv6 bridge and router support, SSDP and Bonjour device discovery options, flexible traffic shaping and SSTP client. New generation DLB devices are backwards compatible with APC series from Deliberant even when using iPoll protocol. In order to achieve this a new firmware image has to be installed on all APC devices (v7.0 or later).

iPoll 3 – enhanced performance protocol
LigoWave’s iPoll™ PTMP (Point to Multi-Point) proprietary protocol is an innovative solution to eliminate transmission congestion and close cluster interference created in PTMP wireless installations.

Hotspot scenario support
Starting from v7.52 Infinity firmware image can be used on a LigoDLB series devices for the outdoor hotspot and other related applications. After the firmware upgrade DLB devices are converted into access points for outdoor hotspot networks and will lose the functionality of point-to-point or point-to-multipoint connectivity.

Specification:

OS
The DLB OS is a highly functional and easy to use
operating system. This powerful and flexible operating
system ensures flawless operation of all DLB hardware
devices and effortless setup for those deploying the
networks.
• Smart polling data transmission protocol (iPoll 2)
• Dual-firmware image support
• Responsive HTML 5 based GUI
• 170 Mbps capacity
• 80,000 PPS rate
• IPv6 support
• WNMS compatible

Wireless
WLAN standard IEEE 802.11 a/n, iPoll (proprietary)
Radio mode MIMO 2x2
Radio frequency band 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz)
Transmit power Up to 29 dBm (country dependent)
Receive sensitivity Varying between -97 and -75 dBm depending on modulation
Channel size 5, 10, 20, 40 MHz
Modulation schemes 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
Data rates 802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Error correction FEC, Selective ARQ
Duplexing scheme Time division duplex

Antenna
Type External N-connectors
Gain Antenna dependent

Wired
Interface 10/100 Base-T, RJ45

Software
Wireless operating modes Access point (auto WDS), access point (iPoll 2), station (WDS, iPoll 2), station (ARP NAT)
Wireless techniques Smart station polling, smart auto-channel, adaptive auto modulation,
automatic transmit power control (ATPC)
Wireless security WPA/WPA2 personal, WPA/WPA2 enterprise, WACL, user isolation
Wireless QoS 4 queues prioritization on iPoll 2
Network operating modes Bridge, router iPv4, router IPv6
Network techniques Routing with and without NAT, VLAN
WAN protocols Static IP, DHCP client, PPPoE client
Services DHCP server, SNMP server, NTP client, router advertisement daemon, ping
watchdog
Management HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet
Tools Site survey, link test, antenna alignment

Physical
Dimensions Length 150 mm (5.9 ‘’), width 115 mm (4.5 ‘’), height 55 mm (2.1 ‘’)
Weight 450 g (16.2 oz)
Mounting Combination wall / pole mount with quick swap bracket included

Power
Power supply 12 - 24 VDC passive PoE (24 V passive PoE adapter is included in the package)
Power source 100 – 240 VAC
Power consumption (max) 4.5 W

Environmental
Operating temperature -40°C (-40 F) ~ +65°C (+149 F)
Humidity 0 ~ 90 % (non-condensing)

Management
System monitoring SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap

Regulatory
Certification FCC/IC/CE

Additional product information:

Datasheet
User Guide
iPoll_3_case_study
Declaration of conformity (CE)