LigoWave LigoPTP RapidFire 5-23
Ligowave LigoPTP RapidFire 5-23, Integrated MIMO 2x2 directional dual-pol 5Ghz 23 dBi panel antenna, 700Mpbs throughput, 1.2 GHz CPU, 2 Gigabit LAN ports - 1 PoE pass-through port, ESD protection, separate 2.4Ghz internal radio for remote management, up to 520Mbps REAL TCP bidirectional throughput PTP links - REQUEST FOR PRICE VIA E-MAIL
|Price: *||For orders (total sum):|
|Login for discounted prices||>500$|
|In stock <10 pcs|
RapidFire delivers an extremely high 700 Mbps throughput via its unique and powerful RF design that supports up to 256QAM modulation and 31 dBi output power. Ligowave proprietary W-Jet V protocol, specifically engineered for high performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms. This model have integrated MIMO 2x2 directional dual-pol 5Ghz 23 dBi panel antenna with frequency range 4.9 - 5.9 GHz.
In addition to achieving maximum performance, LigoWave focuses on delivering flexibility and ease-of-use in our RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses and signal levels (in 1dBm steps) when aligning the antenna.
Powerful all-in-one hardware platform
LigoWave RapidFire delivers powerful performance with its new 1.2 GHz CPU dedicated for data processing and high (200,000) packet per second delivery. Equipped with two Gigabit Ethernet ports, one with PoE passthrough, the unit allows for 1+1 (failover) or repeater links and is ideal for high-security video surveillance scenarios. RapidFire incorporates integrated surge and ESD protection according to IEC standards and passes Class 4 requirements
Wireless configuration interface
An internal 2.4 GHz radio allows access into the Rapidfire GUI by wireless connection with any WIFI equipped device. This feature expedites the installation of links and alleviates the problem of troubleshooting in difficult-to-reach locations. Tests prove accessibility even when mounted on top of a 10-story building while standing 20 meters (65 ft) away!
The LigoPTP operating system ensures easy and rapid deployment of point-to-point links with stable, fast performance. An intuitive and responsive user interface adjusts the layout based on the size of your screen. Essential tools including Setup Wizard, link test, antenna alignment, spectrum analyzer, and site survey are included to make set-up and troubleshooting more efficient. Automatic mechanisms such as auto-channel and automatic transmit power control optimize the link for maximum performance even in areas with high interference.
Setup Wizard. A link setup wizard guides the installer through the important steps of the set-up process.
Spectrum Analyzer. The integrated spectrum analyzer demonstrates the noise floor in order to find the optimum frequency.
Single side configuration. LigoPTP RapidFire simplifies link configuration by supporting single side configuration as parameters are automatically applied to slave units once set on the master side.
Multiple options to pre-configure LigoPTP RapidFire devices. Devices can be connected with each other using wired or wireless connectivity. End-user device can also connect to the master device using 2.4 GHz access radio or using wire to the Ethernet port of the master device. LigoPTP RapidFire devices can be discovered using bonjour and SSDP protocols as well.
802.3af/at inserter is included.
LigoWave won a significant award at the annual US based, premier fixed-wireless broadband conference, WISPAPALOOZA 2015. The LigoPTP RapidFire earned the award for Spectral Efficiency in the 80+ MHz channel bandwidth category.
Wireless protocol: W-Jet V
Radio mode: MIMO 2x2
Frequency range: 4.900 – 6.100 GHz
Channel size: 5, 10, 20, 40, 80 MHz
Modulation schemes: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
Data rates @ 80 MHz: 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
Duplexing scheme: TDD
Error correction: BCC, LDPC
Integrated directional dual-pol 23 dBi panel
Frequency range: 4.9 - 5.9 GHz
Gain: 23 dBi
Polarization: Dual linear
Cross-pol Isolation: 27 dBi
Azimuth beamwidth (H pol): 6 deg
Azimuth beamwidth (V pol): 7 deg
Elevation beamwidth: 9 deg
First Interface: 10/100/1000 Base-T with PoE IN (RJ45)
Second Interface: 10/100/1000 Base-T with PoE OUT (RJ45)
Dimensions without mount: Length 379 mm (14.9‘’), width 387 mm (15.2‘’), height 51 mm (2‘’)
Mount length till pole: 124 mm (4.8‘’)
Weight including mount: 3.9 kg (8.5 lb)
Power input method, voltage: PoE 802.3at, isolated 42 - 57 VDC
Power consumption (max): 8.6 W
Power output method, voltage: PoE 802.3af, 48 VDC, 12.95W maximum
PoE inserter and AC/DC adapter are included
Operating temperature: -40°C (-40 F) ~ +65°C (+149 F)
Humidity: 0 ~ 90 % (non-condensing)
• Wizard for fast link setup
• Centralized control from master: A) Common wireless link parameters; B) Individual slave parameters
• Smart Auto-channel
• Robust data security
• QoS with hardware acceleration
• Spectrum analyzer
• Wireless signal and device state indication on RGB LEDs
• Dual firmware image
Regulatory Certification: FCC/IC/CE
Dedicated 2.4 GHz radio for management
System monitoring: SNMP, GUI/HTTP(S), Shell/SSH and WNMS
System configuration: GUI/HTTP(S) and WNMS
802.3af/at inserter included
DC input voltage range: 44.0–57.0V
IEEE 802.3af/at compliant: POE output
Output power: up to 28W
Power output: RJ45 pins 1,2,4,5 (+) and 3,6,7,8 (-)
Data rate: 10/100/1000Mbps
Surge protection: 2kV line to line, 6kV line to ground (output port)
Data input jack: RJ45
Data + Power output jack: RJ45
Operating temperature: -40 to +65C
UTP/FTP cable length: 100m total (from switch to the device)
Additional product information: