NETIS WF2520P Wi-Fi N Ceiling AP, POE, 300Mbps

NETIS WF2520P High Power Wireless N Ceiling AP, 2Ghz, 802.11a/b/g/n, 20dBm, 2x internal antennas, up to 300Mbps, Passive PoE Supported, wireless modes Access Point, AP Router, Client, WDS, AP+WDS, Client+Repeater

Price: For orders (total sum):
37.97$ >0$
37.63$ >500$
37.29$ >1000$
36.95$ >5000$
36.61$ >10000$
Qty:
In stock

 

Features:

Wireless N transfer speed up to 300Mbps
High transmission power to boost wireless signal for further distance
Provides powerful Wi-Fi coverage that easily penetrates walls obstructions and eliminates dead zones
DC power input and alternative passive PoE ability for flexible deployment
Stylish ceiling-mounted appearance for easy Installation to wall or ceiling surface
Supports Access Point, AP Router, Client, WDS, Repeater, and WISP modes
Zero configuration under default Access Point mode
Quick setup, with built-in multilingual management page

The netis 300Mbps Wireless N High Power Ceiling-Mounted Access Point WF2520P provides long range, high performance wireless Internet access over large areas.It provides you multiple wireless modes including Access Point, AP Router, Client, WDS, Repeater, and WISP, for flexible wireless network setup and deployment. Also, with the passive PoE design, you may easily establish a solution where electrical socket is unavailable or hard to reach. Under the high power mode, you will enjoy much better network experience in large homes, multi-floor offices or warehouses.

WF2520P’s ceiling-mounted appearance makes it easy to be installed to the wall or ceiling surface.

Availability for Various Network Applications
WF2520P supports AP(Default), AP Router, and WISP as operation modes. And under AP Router mode, it provides Access Point, Client, WDS, AP+WDS, Client+Repeater modes for various wireless solutions. Based on your current network structure, you can flexibly choose a suitable wireless mode to build or extend the wireless network.

Penetrate Walls and Eliminate Dead Zones
With the advanced high Power Amplifiers (PA) and Low Noise Amplifier (LNA) technology, WF2520P provides powerful Wi-Fi coverage that easily penetrates walls and Wi-Fi obstructions to provide Wi-Fi coverage in hard to reach areas. It is great for larger homes, backyards, offices, hotels and warehouses.

Passive PoE
The WF2520P can be powered by an Ethernet cable which transmits data and electricity at the same time, to allow you to locate the Access Point in a position even the power slot is not available.You may feel much convenient to get the best signal and coverage when building the wireless network.

Specification:

Wireless
Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Signal Rate: Up to 300Mbps
Frequency Range: 2.4-2.4835GHz
Transmit Power: <20dBm (For countries using CE Standards), <30dBm (For countries using FCC Standards)

Data Transfer Rates:
802.11n:
40MHz(300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30Mbps)
20MHz (144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps) (Auto-Sense)
801.11g:
(54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps)
802.11b:
(11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps)

Wireless Modes: Access Point, Client, WDS, AP+WDS, Client+Repeater
Wireless Security: WEP (64/128-bit), WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK, Mixed Mode, SSID Broadcast Enable/Disable, MAC Address Filtering

Hardware
Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Interface:
WAN/PoE: 10/100Mbps Auto MDI/MDIX RJ45 LAN port,
Passive PoE Supported
LAN: 10/100Mbps Auto MDI/MDIX RJ45 LAN port,
LED Indicators: System, Wi-Fi
Buttons: RESET
Antenna: 2* Internal Antenna
Power Supply: PassivePoE/ DC 24V/0.5A (Output)

Software
Operation Modes: AP, AP Router, WISP
WAN Connection Types: DHCP, Static IP,PPPoE, Russia PPPoE, L2TP/Russia L2TP, PPTP/Russia PPTP
Port Forwarding: Virtual Servers, UPnP, DMZ
QoS: Bandwidth Control
Access Control: MAC Filtering
Others: Dynamic DNS, Firmware Upgrade, Backup & Restore

Others
Certification: FCC, CE
Environment:
Operating Temperature: 0℃~40℃
Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Package: 1* WF2520P, 1* 24V/500mA Power Adapter, 1* PoE Power Injector, 1* Mounting Kit, 1* Ethernet Cable, 1* Quick Installation Guide

Additional product information:

Datasheet
Quick Installation Guide
Declaration of conformity (CE)