NSLM2 UBIQUITI NanoStation Loco M2
Ubiquiti NanoStation M2 loco Wireless 2Ghz CPE with integrated 2x8dBi Mimo antenna
|Price:||For orders (total sum):|
|Out of stock|
NanoStation Loco M2 is a compact outdoor unit which includes 2 x 8 dBi antenna (MIMO) for the 2.4 GHz band.
The unit allows real communication speed up to 150 Mbps.
Another big advantage is (with addition to high transfer speeds thank to
the 802.11n standard) the TDMA Time Division Multiplexing which enables to connect
more than 300 clients to the unit.
This product also has a low latency.
Compared to two predecessors NanoStation M2 Loco has a stronger
processor clocked at 400 MHz and bigger memory.
Web administration is very simple and transparent. Here are a few examples of what can be set:
*AP mode, client or WDS
*transparent bridge or routing between WAN and LAN, without NAT or NAT
*trength of the signal, which shall correspond to specific signaling LED
*Output power to 23 dBm
The device supports transparent IPv6 transfers in the bridge and WDS mode.
The package also consists of the 24 V PoE power source, which contains a reset button.
You can use it for switching the device to the TFTP firmware recovery mode.
Another advantage is PoE support on the second Ethernet port for direct supply of another device.
This feature can be disabled via the software adjustment.
Operation mode AP, Client, WDS
Frequence 2400 - 2486 MHz
Transmission speed up to 300 Mbps
Max.output power 23 dBm
Sensitivity -96 dBm
Modulation OFDM, DBPSK, DQPSK, CCK, 64QAM,16QAM
Encryption WEP, WPA, WPA2
Comformity FCC, CE
LAN port 1x RJ45 10/100 Mbps
Default IP 192.168.1.20
Default name ubnt
Default password ubnt
Power supply 24 V, 0,5 A
Operational temperature from -30°C up to +80°C
Dimension 163 x 31 x 80 mm
Weight 0,18 kg
Interface LAN, WiFI
Supported OS AirOS V
Gain 8 dBi
Polarization Linear - horizontal and vertical
Radiating angle - H 60°/60°
Radiating angle - V 60°/60°
Procesor MIPS 24KC, 400 MHz
RAM 32 MB
NAND 8 MB
Additional product information: