8 port Gigabit PoE Switch with 7 PoE ports

8 ports switch 10/100/1000 Mbps ports with 7 PoE, active and passive POE modes, 24V 2.5A power supply included or 48V 1.25A power adapter under request

Price: For orders (total sum):
66.00$ <500.00$
65.00$ >500.00$
64.00$ >1000.00$
63.00$ >5000.00$
62.00$ >10000.00$
In stock



The ZQ-POESG-8-7 Power Source Convenient switch combines an small-high efficiency 8-port 10/100/1000Mbps switch with 7 PoE port .
The ZQ-POESG-8-7 PoE switch use an external 18VDC to 57VDC power adaptor. All 7 PoE Ethernet ports can provide 30W power as well as 10/100/1000M data transmission over standard readily available Cat 5e/6 cables. The ZQ-POESG-8-7 PoE allow for data and power to be transmitted over a single Ethernet twisted-pair cable to the attached devices.
The ZQ-POESG-8-7 switches is Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) that comply with the passivet PoE standard, allowing users to attach any PoE compliant device such as wireless Access Points (APS), VOIP phone, IP camera, printer and Network Attached Storage (NAS) to the PoE Switch without requiring additional power.
On a network. The unit is designed with home and small business users in mind
and is a cost effective solution for environments where AC power is not available
or too costly to install.

8 switch ports with 10/100/1000Mbs auto detect operation with status LED

Available power supply options:
18 volts, 24 volts, 48 volts 56 volts
30 watts, 60 watts, 120 watts
100 to 240 volt AC input, 50 or 60 hz high efficiency

7 always on PoE outputs with either Mode A and/or Mode B:
Mode A power and data on pins 12 (-) and 36 (+)
Mode B power or pins 45 (+) and 78 (-) with
data on pins 12 ,36,45 and 78

Dual PTC fuses on each PoE output port:
One 650 ma fuse per port for Mode A
One 650 ma fuse per port for Mode B

18 volt to 56 volt operation

Function switch on/off Mode A/B

Power supply inputs:
2.1mm power connectors, center positive
Mode A input with LED status
Mode B input with LED status
LED indicates 18/24 volt operation or 48/56 volt operation
Maximum input current per mode – 2.5 amps
Mode B PoE power input from the uplink port – 1 amps max

Dual Power supply operation:
Redundancy - 48v 802.3af only – see text
Load balancing – 48v 802.3af only – see text
Mixed voltage – Mode A at 48v and Mode B at 24v

Uplink port 10/100/1000 Mbs:
No PoE voltage out
Auto detect 568 A or 568 B connections

802.3af emulation ( always on, no autonegotiation) - 48 volt in either A or B modes

Mikrotik, OpenMesh, Ubiquiti passive PoE - 24 volt in mode B

By default 24V 2.5A power supply included, if you need 48v 60W power supply with those - please let us know. Price is the same.


Input 100-240V AC 50/60Hz
Output 18 to 56 V (650ma max per port)
Data 1/2&3/6&4/5&7/8
Power 12/36(Mode A) 45/78(Mode B)
Data In Connects PC/HUB/Switch
Weight 0.85Kg
Ethernet Cable TIA/EIA 568 Cat. 5/6
Data rate 10/100/1000Mbps
Connector RJ-45
Operating Temperature 0°C ~ 40°C
Storage Temperature -40°C~+70°C
Operating Humidity 10%~80%RH
Storage Humidity 5%~90%RH
Certification CE & FCC
Case of material metal work material
Dimensions 192mm×82mm×27mm
24V 2.5A power supply included, 48V 1.25A power adapter under request

Additional product information: