Netonix WISP POE Switch (WS-6-MINI)
Netonix WISP Gigabit POE Switch WS-6-MINI, 6 gbit poe ports, up to 1.5A of 24V or 48V, power adapter not included
| Price: | For orders (total sum): |
| 222.50$ | >0$ |
| 218.94$ | >500$ |
| 215.38$ | >1000$ |
| 211.82$ | >5000$ |
| 208.26$ | >10000$ |
|
Out of stock 0 pcs
|
|
Features:
Introduction
The Netonix® WISP Gigabit POE Switch model WS-6-MINI was designed specifically for the WISP industry with a rugged chassis and extended operating temperature range. It features a simple yet powerful user interface providing the software features WISPs need in a switch.
Software Features:
• LAG – Port aggregation LACP/Static
• STP / RSTP / MSTP (MSTP available with firmware v2.0)
• Port mirroring and remote monitoring via Wire Shark with CPSP
• VLAN dot1Q/QinQ/Port Trunking
• SNMP - complete statistical reporting
• SMTP alerts - configurable
• Bandwidth limiting per port
• Ping watch dog per port
• Scheduled port bouncing
• Cable Diagnostics
• Loop Protection
• DHCP Snooping
• IGMP Snooping
• Flow Control - with back pressure
• Storm Control
• Multicast Filtering
• Port Isolation
• Auto TFTP Backup on Config Change
• UDP - Ubiquiti Discovery Protocol
• CDP - Cisco Discovery Protocol
• Security - access control list and login tarpit
The WISP Switch™ features the ability to power many popular 24V, 48V/50V passive PoE devices from many manufacturers including the Ubiquiti Networks® airMAX™, UniFi™, SAF™, MIMOSA™, Ligowave™, and airFIBER™ product lines.
Highest density of PASSIVE POE ports per cubic inch on the market for those small equipment boxes.
The only switch line on the market that can deliver 1.5A of 24V or 48V on all 4 pairs (24VH and 48VH).
Manufactured and Assembled in North America
Standard Desktop / Wall mount
Dimensions 127mm x 118mm x 32mm
Operating temperature -25 to 55°C (-13 to 131° F)
Power adapter NOT included.
Can be powered by:
48VH 1.5A passive POE port from another WISP Switch.
48-53V DC POE adapter up to 2A
48-53V DC barrel connector up to 2A
Configureable voltage / current:
24V PoE Ports, Pins 4,5 (+), Pins 7,8 (-), .75A. Ports 03-06
48V PoE Ports, Pins 4,5 (+), Pins 7,8 (-), .75A. Ports 03-06
24VH PoE Ports, Pins 1,2,4,5 (+), Pins 3,6,7,8 (-), 1.5A. Port 02
48VH PoE Ports, Pins 1,2,4,5 (+), Pins 3,6,7,8 (-), 1.5A. Port 02
Note:
Port 1 will accept passive 48VH (48-53V) using all 4 pairs like a POE
injector used to power an airFIBER 24 GHz.
DO NOT power the WS-6-MINI with a standard passive POE adapter
that only supplies 48V power on 2 pairs.
If powering the WS-6-MINI with a 48-53V barrel connector power supply
port 1 has no POE options, it is just a standard Ethernet port.
If powering the WS-6-MINI with a barrel connector power supply be
sure to connect the ground screw to Earth Ground for ESD protection.
!!! NCS version [No Current Sensors] - does not report watts per port !!!
Specification:
Manufactured and Assembled: North America
Desktop / Wall mount: YES
Dimensions: 127mm x 118mm x 32mm
Weight: 1 kg
Power Input: 37-53 VDC
Chassis Earth Ground Lug: YES
Max. Power Consumption: 2A
Switch Core and PHYs: Vitesse
Processor: MIPS 24K 416 MHz
System Memory: 128 MB
Flash Storage: 16 MB
Total Non-Blocking Line Rate: 6 Gbps
Certifications: CE, FCC, IC
Operating Temperature: -25 to 55°C (-13 to 131° F)
Operating Humidity: 5 to 95% Non-Condensing
Ethernet Ports: (6) 10/100/1000 Ethernet Ports
Passive PoE Configured Per Port via UI:
24V 0.75A pins 4,5(+) 7,8(-)
48V 0.75A pins 4,5(+) 7,8(-)
24VH 1.5A pins 1,2,4,5(+) 3,6,7,8(-)
48VH 1.5A pins 1,2,4,5(+) 3,6,7,8(-)
PoE Out Voltage Range: 48-50 VDC / 22-24 VDC
Passive PoE Current Sensors Per Port: NO
ESD Rating: 24 kV Air / 24 kV Contact
